A real-time simulating non-isothermal mathematical model for the passive feed direct methanol fuel cell

In order to understand the complex transport phenomena in a passive direct methanol fuel cell (DMFC), a theoretical model is essential. The analytical model provides a computationally efficient framework with a clear physical meaning. For this, a non-isothermal, analytical model for the passive DMFC has been developed in this study. The model considers the coupled heat and mass transport along with electrochemical reactions. The model is successfully validated with the experimental data. The model accurately describes the various species transport phenomena including methanol crossover and water crossover, heat transport phenomena, and efficiencies related to the passive DMFC. It suggests that the maximum real efficiency can be achieved by running the cell at low methanol feed concentration and moderate current density. The model also accurately predicts the effect of various operating and geometrical parameters on the cell performance such as methanol feed concentration, surrounding temperature, and polymer electrolyte membrane thickness. The model predictions are in accordance with the findings of the other researchers. The model is rapidly implementable and can be used in real-time simulation and control of the passive DMFC. This comprehensive model can be used for diagnostic purpose as well.     

氢氧化镁对水中As（Ⅲ）的吸附作用

以氢氧化镁为吸附材料,通过单因素实验分别考察了氢氧化镁投加量、pH、温度、吸附时间对吸附效果的影响。研究了氢氧化镁对As（Ⅲ）的吸附热力学和动力学特性,并对作用机理进行了探讨。结果表明：在砷初始浓度为0.5～100 mg/L之间,温度为25℃,pH为3,氢氧化镁投加量为0.5～4 g,吸附时间为1 h的条件下,氢氧化镁...     

PVA降解混合菌系生长和产酶的营养条件分析

研究碳源、氮源以及不同金属离子对PVA降解混合菌系生长和产酶的影响。结果表明,混合菌系生长过程中无机氮源优于有机氮源;补充碳源可促进混合菌系的生长,但酶活比不添加时稍有降低。金属离子对酶活影响的正交实验表明Mg2＋浓度影响最大,其次是Fe2＋和K＋浓度,Ca2＋、Mn2＋、Zn2＋和Cu2＋浓度影响较小;最佳浓度分别为Mg2＋0.05 g/L、Fe2＋0.04 g/L、K＋2 g/L和Ca2＋0.05 g/L。     

聚合物驱采出水中聚丙烯酰胺的微生物联合降解作用研究

通过对2株细菌的培养降解实验研究聚丙烯酰胺(hydrolyzed polyacrylamide,HPAM)降解菌对水环境下聚丙烯酰胺的降解作用,讨论协同降解机理。2株降解聚丙烯酰胺的菌株假单胞菌CJ419、枯草芽孢杆菌FA16在初始30℃废水样品上培养,定期测量细菌生物量和HPAM降解率。培养30 d后CJ419和FA16对聚合物的降解率最大值分别达到30.4%和25%,而以1∶1比例的混合菌降解率最大值达到80.3%。对2株菌胞外各组分研究表明:混合菌降解HPAM的机理主要由胞外降解酶系水解聚合物侧链基团导致HPAM降解为小分子物质,同时生长过程中降解菌还会释放非蛋白还原性物质引发氧化反应共同参与HPAM降解。     

铁氮掺杂碳纳米管/纤维复合物制备及其催化氧还原的效果

阴极催化剂是影响微生物燃料电池(microbial fuel cell,MFC)性能的关键因素.通过研究制备成本低廉、氧还原反应(ORR)催化活性高的阴极催化剂来替代Pt/C对于实现MFC规模化应用具有重大意义.研究采用化学气相沉淀法,以三聚氰胺作为碳氮前驱物、以黑珍珠2000或乙炔炭黑作为碳源,外加醋酸亚铁作为铁前驱物,合成了两种铁氮掺杂碳纳米管/纤维复合物(FeNCB和FeNCC),作为MFC的阴极催化剂.通过循环伏安法和旋转圆盘-环电极分析FeNCB、FeNCC和Pt/C的ORR催化活性的差异,并用MFC验证其差异.结果表明,FeNCB性能与Pt/C相当,优于FeNCC,其催化路径是通过4电子途径催化氧还原反应;MFC-FeNCB性能略优于MFC-Pt/C,显著优于MFC-FeNCB有助于MFC的扩大化,其最大功率密度为1 212.8mW·m~(-2),开路电压为0.875 V,电池稳定电压为(0.500±0.025)V.用X射线衍射、X射线光电子光谱、拉曼光谱等进一步分析显示,复合物中碳纳米管管径的大小、铁氮掺杂的类型和含量以及氧含量是引起制备的复合物催化氧还原性能差异的原因所在.     

水稻不同生育期根际与非根际土壤胞外酶对施氮的响应

与稻田土壤碳氮循环(矿化、转化等)密切相关的酶活性可以反映微生物的生长和代谢过程.为明确水稻不同生育期根际与非根际土壤胞外酶对施氮的响应,采用根际袋法区分水稻根际和非根际土壤,利用96微孔酶标板荧光分析法,测定其碳氮过程关键酶β-1,4-葡萄糖苷酶(BG)和β-1,4-N-乙酰氨基葡萄糖苷酶(NAG)活性,探讨根际效应、施氮和生育期对土壤酶活的影响及其调控机制.结果表明,施氮使拔节期土壤BG酶活性相对于不施氮处理降低了7.4~13.5 nmol·(g·h)~(-1),而使成熟期BG酶活性增大了7.0~31.4 nmol·(g·h)~(-1),同时根际与非根际土壤中BG酶活性也随水稻的生育期而发生相应的变化.与不施氮处理相比,施氮使水稻成熟期非根际土壤NAG酶活性增加了1.1倍,根际土壤降低了0.3倍.施氮和生育期显著影响土壤BG酶活性,而水稻生育期、施氮和根际效应及其交互作用均对NAG酶活性有极显著影响.RDA分析表明土壤微生物生物量碳(MBC)和可溶性有机碳(DOC)含量主要影响水稻根际土壤胞外酶活性;而非根际土壤中酶活性的变化主要受微生物生物量氮(MBN)和铵态氮(NH_4~+-N)的影响.土壤酶活性与多种因素存在复杂关系,需要综合考虑植物生理特征、土壤酶活性和土壤特征,分析N添加对微生物群落组成的影响.     

我国应关注ISO呼吸防护的标准化工作

本文介绍了国际标准化组织（ISO）正在开展的呼吸器标准化工作的情况,包括参与国家信息和工作分工情况,以及ISO呼吸器标准体系、产品分类、标准项目信息、产出、进展和进度,分析了ISO标准在未来对全球呼吸防护计数和产品市场发展的影响,并呼吁中国尽早采取主动行动参与其中,争取获得更多的话语权和掌握未来产品技术发展方向的主动权。     

基于AHP-Fuzzy的高处坠落危险性评价研究

高处坠落事故在建筑安全生产事故中所占的比率最大。预防和控制高处坠落事故始终是建筑业应解决的重要问题,高处坠落危险性评价是预防与控制高处坠落事故的重要手段。以高处坠落风险为研究对象,通过对高处作业＂人—机—环境—管理＂复杂系统进行分析,建立生产人员素质因素、生产设备因素、环境条件因素、安全管理因素等4个大类和23个小类的危险性评价指标体系。在层次分析法和模糊综合评价法等研究基础上,构建了高处坠落风险的AHP-Fuzzy评价模型,确定了各层次的权重集。对给出的实例进行评价,评价结果符合实际情况。结果表明,基于AHP-Fuzzy的高处坠落危险性评价方法是可靠与实用的,并对高处坠落危险性的评判有指导意义。     

环境因素对供应链中生产者食品安全行为的影响机制仿真分析

通过食品安全环境因素的改善和规范,来提高食品安全效果是具有现实意义的。本文归纳了影响食品安全的环境因素,特别是影响生产者食品安全行为的环境因素;环境因素对供应链食品安全的影响主要体现在生产者食品安全行为的选择上,为此,设计了环境因素对供应链生产者食品安全行为影响机制;为了分析环境因素对供应链中生产者食品安全的影响,从生产者食品安全行为的影响机制中选取了消费者食品安全意愿、生产者市场占有率、罚款金额等环境因素,以生鲜蔬果供应链中覆盖流通领域的那个部分提出了生产者食品安全行为选择策略的仿真模型,使用Netlogo软件进行了多主体仿真。通过仿真发现,食品监管的手法还宜细化,提升技术因素可以有效改善中国的食品安全水平。     

Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.